Here are the earrings is not difficult to do, and they will be very interesting to look at your ears.
Earrings in the shape of a fan
You will need wire, beads, and faceted beads faceted bicone. The finished earrings are fan-shaped that makes them so funny.
We take our wire for making jewelry and cut from it a small piece.
Further formed with a pair of pliers here this fold. The photo shows what length it needs to be. And then from the fragment (folds) have already formed a loop. Here you will need the assistance of pliers.
Strung on a ready piece of wire with a loop our 5 bicones and gold beads. Now in the upper part of the segment also generated a loop.
Such parts we will need 7 things.
Now cut off from the longer piece of wire, in the same way will form on the end of the loop. And starting to put our earrings together.
Take the first long part, then round again the finished part, and again more. So the generated number until all details are strung a new wire segment. Cut the excess wire and form a loop, so our items are not scattered but kept together.
Then take or ready a ring with a diameter of 1 cm, or make it yourself from wire and strung it on the loose ends of our items. Because of this, our earring and takes the form of a fan, because the bottom is wider than the top.
Now it is small. Because the ring looks pretty empty, we add the large faceted bead, of a suitable size. Fasten it with thin wire, which formed a few turns around the ring, on each side of the beads.
And the final touch – attachable enclosure. And now, our earrings in the form of a fan ready. So far only one, but the second performed exactly the same. Good luck to you in your endeavors.
