Product weight: earrings (pair) — 5.4 grams pendant 12.7 grams.
Materials
- silver earrings — 2 pieces;
- silver memory wire with a small diameter — round 2;
- T — shaped silver clove (Pina) — 4 pieces;
- silver beads — 81 piece;
- flat faceted purple glass crystals with a diameter of 0.5 cm — 26 pieces;
- oval faceted transparent beads made of glass/ crystal diameter 1cm — 11 PCs;
- oval faceted dark purple glass bead with a diameter of 1.2 cm — 1 thing.
Job description.
- Cut with wire cutters, a coil of small diameter wire into two equal parts. On one side of the bent loop in the pliers and begin stringing the basics for earrings. String onto the wire: one silver bead, one transparent bead and six silver beads. Repeat this sequence three times. To lock the wire after the bead round nose pliers make a loop out. Similarly we make the second basis for earrings.
- From the second coil wire manufacture components of the pendant. Divide pliers round into two equal parts and formed by the pliers with one hand loop on the outside. String beads in the following order: one silver bead, one purple crystal, one silver bead, one transparent bead. Repeat the whole cycle three times. Finish stringing: one silver bead, one purple crystal and one silver bead. Lock wire pliers to form a loop inside. Do the same on the second part of the pendant.
- Formed intermediate to the two parts of the pendant. To do this, a T - shaped stud of the cutter bites off a hat. On the resulting five-centimeter piece of wire string one translucent bead and put the two ends of the block double loops. Connected intermediate the two parts of the pendant in the shape of the letter S. In the conclusion to make pendant necklace. The T — shaped stud strung: one dark purple bead, one silver bead, one purple crystal, one silver bead, one purple crystal, one silver bead. At the end of the pliers forming a simple loop. Attach the hanger to the bottom of the pendant. The pendant is ready.
- For the formation of suspensions for earrings take a T - shaped stud. Strung him: one purple crystal, one silver bead, one purple crystal, one silver bead, one purple crystal, one silver bead. Leave the tip of the wire size of 1.2 cm and at the end formed a simple loop. Similarly produce the second suspension. Charms attach to the bottom of the earrings from the oval faceted transparent beads on the loop inside. From the outer loop attachable earrings for Svente. Open loop earrings with pliers and tonkokostny as a ring. Put them on the outer loop and close. The earrings are ready.
- When attaching earrings earrings pivoted to the right side so they were symmetrical to each other.