Product weight: earrings (pair) — 11.3 gram
- silver earrings — 2 pieces;
- gold wire with a memory of large diameter single round;
- T — shaped silver clove (pins) — 2 pieces;
- jump rings silver color — 2 pieces;
- transparent seed beads — 116 pieces;
- large gold beads — 14 pieces;
- hematite beads with a diameter of 0.4 cm — 10 pieces;
- stone chippings crystal with holes — 24 pieces.
- For the manufacture of earrings a single turn of wire of large diameter cutters divide into two equal parts. Placed in the center of the semicircle 3 cutting crystal with alternating large Golden beads. Continue symmetrically on both sides strung on one clear bead, one hematite busine, one transparent bead, one Golden bead, one clear bead, one hematite busine, one transparent bead, three cutting crystal with alternating transparent bead. Complete 20 alternating transparent beads on each side. The ends of the wire lock internal hinges and fasten with the two sides of the connecting ring.
- Further, the formed inner suspension. The T — shaped stud strung: one hematite bead, one large gold bead, one clear bead, three cutting crystal with alternating transparent bead, one clear bead, one large gold bead, one clear bead, one large gold bead, and one transparent bead. The end of the wire closes in a simple loop.
- The connecting ring is sturdy with two sides of the enclosure and the suspension. Open loop earrings and pendants. Open loop earrings, and loop suspension tools, like a ring. Put them on a jump ring and close. In the end position shvenzy should be at the top of the ring and the pendant at the bottom. The same pattern make the second earring.