**Fox bead**must be strung into the middle of the wire 7 beads and 4 of them to thread the wire twice so that the ends came out from different sides of extreme beads of the row. Work 1st and 2nd rows

__of the tail__. Generally Fox, like the monkey beaded, woven from the tail. 3rd row: strung on one end of the wire four beads, and the other end to pass through them, aiming in the opposite direction. The following series are weaved in a similar way, changing only the number of beads in the ranks:4th row of five beads;

5th row of six beads;

6th row- seven beads;

7th row — seven beads;

8th row — six beads;

9-th row of five beads;

9th row- four beads;

11th row- four beads;

12th row- three beads;

13th row- three beads.

After weaving a tail turn to the weave

__of the torso of a Fox__. 1st row: on the right end of the wire to string four beads on the left wire end to thread through these beads in the direction from left to right. 2nd row: strung on one end of the wire four beads through which then pass the other loose end of the wire, directing it in the opposite direction. The following series are weaved also, changing only the number of beads in each row:3rd row — seven beads;

4th row- seven beads;

5th row- nine beads;

6th row- eight beads;

7th row — ten beads;

8th row — eight beads;

9-th row of ten beads;

10th row- nine beads;

11th row of ten beads;

12th row- eight beads;

13th row- nine beads;

14th row- seven beads;

15th row- eight beads;

The 16th row of six beads;

17th row- seven beads;

18th row of six beads.

Then drags

__the head of a Fox__. Weaving principle is the same:

1st row five beads;

2nd row of seven beads;

3rd row- seven beads;

The 4th row of seven beads.

From the 4th row you need to weave

__the ears__. For the manufacture of the right ear must be strung onto the right end of wire, five beads and thread it through the rightmost bead of the 3rd and 4th rows. Similarly, lagging left ear: on the left end of the wire to string five beads and pass it through the leftmost bead of the 3rd and 4th rows. Then continue weaving head: The 5th number of five beads; 6th row- five beads, while the 2nd and 4th beads should be black (eyes); 7th row — three beads; 8th row — two beads; 9th row — two beads; 10th row — one black bead (nose). The remaining ends of the wire close. At the end of the weaving heads turn to the production of

__the right rear foot__. Strung in the middle of the wire six beads, two extreme of them to thread the wire twice — get 1st and 2nd rows. 3rd row: strung on one end of the wire two beads, and the other to pass through them so that it came out on the other side of the row. The following series are made with the following beads: 4th row — two beads; 5th row — two beads; 6th row- three beads; 7th row — three beads. To attach the foot to the 3-rd and 7-th rows of the body, after which you can proceed to netting

__of the left hind paw__. It is woven in the same way as the right, the number of beads in the ranks should be as follows:1st row — three beads;

2nd row of three beads;

3rd row — two beads;

4th row — two beads;

5th row — two beads;

6th row — two beads;

7th row — four beads.

In order to make

__the right front foot__, you need to put in the middle of the four wire beads, thus using one of them to thread the wire twice in different directions so that this bead was above the other three. Get 1st and 2nd series. Continue:3rd row — one bead;

4th row — two beads;

5th row — two beads;

6th row — two beads.

To attach the paw to the beads 16-th and 18-th rows, and then you can spin

__the left front paw__. The number of beads in the ranks should be as follows:

1st row — two beads;

2nd row of two beads;

3rd row — two beads;

4th row — one bead;

5th row — one bead;

6th row- three beads. At the end of the netting left rear legs, the free ends of the wire close.