Before you start the beaded eggs-beaded, prepare all the necessary materials and tools, it depends on the strength of products made of beads, which suit for Easter eggs. This step in the work is very important, approach it responsibly. Wooden blanks in the shape of an egg They are called linen. It is very important to choose the right preset-base: can work only an experienced master (it is a little harder to tighten the working thread, on the basis of formed crater, which is almost impossible to remove); the surface of the blank plastic is very slippery, so here is also need some experience to keep the belt or chain at the center of the workpiece, you can make the base of natural egg, but it is a very long and troublesome process. But the wooden blanks are suitable for braiding almost perfect: they are quite hard, not slippery, fairly easy; they can be painted in any color.
If you are just beginning to twine balls, it is best to choose a billet the size of a regular chicken egg, because for big uses a lot of material; much time you spend on work, tired, and get tired of waiting, what happens? In turn, the small base is a little tricky to work too abruptly, reduce the number of beads in each row. The tree from time to time dries out, it can cause cracks. To protect the workpiece, cover it with nitrocellulose lacquer. Stand under the egg They can be turned separately or in a single blank with the eggs; if you buy separately, make sure they approached the egg made the texture, size, color, and did not spoil the overall composition. Easier to weave a ring of beads, repeating the basic colors of beads used for beaded eggs-beaded. Can as a stand to weave a piece of bulk harness and splicing it into a ring, but to do it after the egg is ready, not to be mistaken in size and color.
Better buy a few blanks: there is always the likelihood that you woven belt will be a little small or too big for the selected framework, but ideally will be located on the other, which has a slightly different radius of the Central part. Even to reduce the radius of the linen can be processed an emery paper. Fishing line Is a diameter of 0.15-0.17 mm (or thread reinforced with two additions, but fishing line is stronger and has elasticity that allows the bead to the canvas tight, with no slack to adhere to the workpiece). Line that rack up the beads, and then weave the product, called working. During the threading started work is always in the left hand and the fingers of the right lead working thread. The length of the line should be 1.5-2 m; work should start from the middle, first in one and then in the other direction. When the fishing line ends, you need to fix the end (to stretch it through several beads at vertical and horizontal beaded cloth), and then take a new line, to bring her to the end of the job, similarly after going through the beads on vertical and horizontal leaf, then continue braiding. To fix the line must pass not less than 4-5 rows, then the Beaded eggs bead is durable and will not crumble. Beading, cutting, beads, sequins and rhinestones Beading is better to take medium size beads and crystals — with a diameter of 3-4 mm. And with a cabin it is necessary to define very carefully: it can cut fishing line and then the product will crumble.
Needle for beading No. 10-13. The main working needle for No. 12, but sometimes can not do without needles No. 13. And sometimes the holes of the beads are so small that you need to take a needle, No. 10 or No. 11.
Additional tools and materials Scissors, pliers, matches (lighter is better), cloth (wool size 20×30 cm, it is convenient to work), a notebook in a cage, colored pencils or markers, satin ribbon width of 2 cm, copper wire, PVA glue and rubber, tempera or varnish.