Fixing single beads
Bead you can just sew a stitch to the fabric, and you can use the beads of smaller size to form a smaller column. Instead of the bottom beads, you can insert piatco. For three-dimensional sewing, you can make a column of two or more beads.
Very nice beads of different colors and different sizes, sewn by one close to each other. They can be placed inside the metal pieces, inside the outline of the contrasting beads or apply chaotic scattering on the fabric, creating bright spots on the embroidery. The second photo shows a sequin, sewn to the braid with beads.
The seam "forward a needle"
The seam "Forward a needle" is familiar to us from the lessons of labor in school. Why not decorate it with beads? Withdraw the needle at the front side, string on her bead and pass the needle through the fabric close to busine. Again withdraw the needle to the front side, making a small stitch from the wrong side and again string beads.
Seam lowercase
This seam performance can be similar like on the seam "Forward needle" and stitching pricep - you can vary the distance between beads. If you want to give your embroidery stiffness or fix the beads in a straight or smooth curving lines, then after the stitch pass the needle in the opposite direction, then the beads will stand up straighter.
Seam stalked
In this method of sewing the embroidery becomes quite hard. Dial 2 beads and pass needle through the fabric on the underside near the second bead. Withdraw the needle at the front part between the first and second beads, and pass through the second hole beads. String the third bead and go back up the needle on the underside near just strung beads. Continue until you reach the desired length of stitch.
Arched seam
The execution is similar to the previous stitch, only the needle 2-4 strung beads. In this method of sewing the beads are arranged more freely, the embroidery turns out less hard.
Seam prikra
Sewing prikra beads are first strung on a string, which is then sewn on to the fabric short stitches between the beads. Sewing prikra allows you to quickly make jewellery from beads, not by chance, North American Indians have given to this method of sewing called "Lazy wife." Put the thread with beads on fabric. Other thread sew bead of beads in each bead (see picture) or through 2-3 beads.
The seam "forward needle" bilateral
Seam similar to the seam "Forward needle", with the only difference that a purl stitch is longer and is strung bead.
Seam stalked-lowercase bilateral
This seam is obtained from the above two seams: the row and stalked. In this method of sewing the embroidery turns out hard. The figure shows the operation procedure:
Seam prikra bilateral
On the thread, pricevalue bead bead to the fabric with the wrong side strung beads, and then the needle goes to the front of the embroidery, done stitch, prisivashye beaded bead to the fabric. The needle goes on the wrong side, where the exit to the front of the thread again strung beads.
Seam "monastic"
For each stitch on the front side strung one bead is a diagonal stitch and the thread goes to the wrong side close to busine. On the underside of done a vertical stitch, the thread goes back to the front side and a second diagonal stitch with a bead. Thus, with the front side work diagonal stitches with strung beads, and on the wrong side stitches are vertical.
Seam overlock
The suture is like an ordinary blanket stitch, only each loop is inserted into the bead. I was obatala so your jeans pocket, it came out very nice ;)
Seam "cross"
What happens when an ordinary seam "cross" to include the beads? Take for embroidery fancy thread. Make one stitch of thread, and the second type a few beads. You can dial the beads on both strands in the cross.
Don't be afraid to dream! The beads can be inserted in almost all the known seams