Twist the loops when knitting

In the process of knitting products have to reduce the number of loops that the product looked more elegant and has preserved the individuality of the figure. In this case, use obuvki.

Obuvki are divided into single and double.

Single obuvki

Single obuvki on the front side knitted fabric

Single obuvki tilted to the left. From left needle off the loop on the right, not promazyvaya her. The loop on the left spokes vymazat there. Using the left needle, string the first loop to the second, not promazyvaya her.

Thus, the reduced loop is typically extended to exclude this effect, proceed as follows. Remove the two loops on the left spokes on the right, not promazyvaya them doing one yo and these two loops subtract on it.

The conventional method of obuvki two loops to be reduced to their promazyvanii together. With this method they are free to turn around and give a relief that in a separate knitwear is undesirable.

Single obuvki tilted to the right. To obtain obuvki, promazyvayut along two loops, inserting right needle from left to right first in the second loop, then the first, then both loops provyazat together there.

 

Single obuvki on the wrong side of knitted fabric

Single obuvki tilted to the left. The left needle take the extreme knitted loop from right needle and prodelyvat through the first loop of the left needle. Received a new loop off the right needle.

Single obuvki tilted to the right. The right needle, take the two loops and dragged them first through the first, then through the second loop, then both loops promazyvaetsya together inside out.

 

Double obuvki

Double obuvki differ from the single fact that when they subtract two loops. Double obuvki used in lace, fishnet and other knitwear, as well as for the formation of corners. The selection of different types of ubavoj do depending on the decorative effects that want to get with this knitting. Double obuvki on the front side knitted fabric

Double obuvki tilted to the left. Promazyvayut three face loops together, grabbing them from behind. This is done as follows. Right needle threaded right to left, first in first, then second and finally the third loop, after which all three loops promazyvaetsya together. This is a known triple twist (despite the fact that subtract only two loops).

Other obuvki tilted to the left. Remove one loop from the left needle to the right, not promazyvaya her. The following two loops together promazyvaetsya there. Then take your left needle shot to right needle loop and promazyvayut her in the loop obtained as a result of subtraction of the two loops. This loop forms a dual-axis obuvki. .

Double obuvki tilted to the right. Promazyvayut three face loops together, capturing them in front. This is done as follows. Right needle threaded from left to right first to a third loop then second and finally first, after which all three loops provyazat together.

Another twist with the tilt to the right. Remove one loop from left needle to right. Next, the average loop vymazat there. She transferred the removed loop. Take the resulting loop on left needle, her doing the twist from left to right as the loop on the left spokes and thus obtained a loop off the right needle.

Double twist in the longitudinal direction. Photo promazyvaya, two loops together on the right needle, threading the right needle first into second and then into first St, vymazat next loop was evident on her subtracting these two loops.

 

Double obuvki on the wrong side of knitted fabric

Double obuvki tilted to the left. Promazyvayut two loops together inside out. The resulting loop is the middle loop, which is taken again on the left needle and right needle, turn the next loop.

Double twist with a slope to the right. Shoot one reverse loop on the left spokes on the right, not promazyvaya her. The following two loops left needle promazyvayut together inside out, then removed the loop is transferred to the turned loop.

Add comment

Security code
Refresh