When it is necessary to increase the number of loops in the knitted cloth, apply the gain loops. Do commonly increase through the row. They come in single and double.
A single gain loops.
Individual increases include: ordinary single raise, a raise is raised through the loop insertion gain and gain through nakida. Ordinary single raise. Ordinary single raise is used in hosiery knitting; it is done in the following way. Vymazat one front loop without removing it from left needle. The thread is placed on a front side and a needle is injected again in the same loop, but this time the loop vymazat inside out, after which the thread again transferred back to continue knitting.
When it is necessary to make these increases on both sides of knitted fabric, is passed through the two loops on each side, and increase do in the third loop from the beginning of the third loop before the end of the row. Thus get symmetric the addition of loops.
Another way an ordinary single raise. Vymazat the front loop, then without removing from the spokes, it vymazat again on the front side, but this time from the back side. Crossed threads form one line, a decorative effect which can be used in binding.
Increase through raised loop.
This increase is obtained as follows. Knit from the front side. The end of the right needle is introduced into the head loop of the bottom row above is the loop of the top row (i.e. row, which you knit). Knit as with an ordinary loop, then vymazat next loop on the front side. Thus, the gain is formed on the right side of the loop. To make a raise on the left side of the loop, do the same, but with the difference that the first vymazat loop of the row, which is knit, and then threaded the end of a spoke to the head of the loop, which is in the bottom row, just under the top loop. Thus, the gain is formed on the left side of the loop.
In this case, the symmetry of the increments is obtained due to the fact that the increase is carried out simultaneously after the third loop in front of the row and at the end.
Another way to increase through raised loop. In this case, when knitting the front side first, vymazat one front loop of the bottom row, then vymazat also on the front side of the loop, which is located above this loop in the top row (i.e. row, which is knit). Knitted so the two loops removed from the left needle to the right.
This increase is obtained as follows. With the left needle lift the longitudinal thread that connects both loops, then vymazat right spokes one front loop, threading the thread back. Thus, the loop crosses over and not get holes. And with this increase, as with all others, symmetry is obtained because the addition starts after the third loop in front of the row on the left side and before the third loop at the end.
Increase by nakida. Such an increase is most often consumed with knitting lace, children's dresses in the form of Raglan and others. It consists of nakida, forming an additional loop in the knitting of the next row knit like an ordinary loop.
Double increases are created on the same principle as single. Usually, they share the same front loop, which forms the axis of the double raise. There are several ways of double addition. Double raise on three hinges. In the place where you want to make such a raise, leave three loops. Of the first loop vymazat two loops - one obverse and one reverse. The second, or middle loop, vymazat front and form the axis of the raise. The third loop vymazat as a first - time facial and time wrong. In the next row, knit all the loops wrong. Gain always do while loop that precedes the middle (main) and the one that follows it. The second method of formation of a double gain for the three loops. It is obtained in the following manner: knit the first loop the second time, taking the back. The average loop vymazat facial. The third loop knit as the first. In the next row, knit all the loops wrong. При6авки always do while loop that precedes the medium, and that which is after it. The gain through the loop, a raised from the bottom row. Knit one first front loop, and the right needle is introduced into the head loop of the bottom row, which is located under the middle hinge. Central loop knit facial, taking the rear to avoid the formation of holes. Then again, knit one front loop, threading the needle in the head of the same loop of the bottom row. The third method of forming a double gain with the help of a loop raised from the bottom row. The Supplement is also doing three loops; the average of them forms the axis of the raise. The very gain made so that the loop, which is located in front of the middle (main) loop, vymazat there, without removing it from left needle. After that, vymazat loop of the bottom row and then remove both stitches together from left needle, and transferred to the right. Central loop knit facial and the next loop - the third is knit in the same way as the first, but with the difference that the first knit loop on the lower row and then the top.
Insert a double raise.
And this increase will form the basis of one of the Central loop. Under cross thread that connects the two loops, down right needle and pull loop on the left and right of center. All three loop knit facial. Double increase through the openwork. The raise was prepared as follows: about the Central loop, defined as the axis increments, do one nakida front of the Central loop and after it. All the loops of the next row, including nakedi, vymazat wrong.