1. THE COLLAR "STAND"
The collar "stand" can tightly fit the neck or be more free. Having made all parts of the product, we collect the loop for a collar "a rack". Begin from the middle of the back and knit garter viscous to the desired height. Then perform a fold line. A fold line can make teeth. The second half stands knitting needles of a smaller diameter, repeating a series in reverse order and increasing the binding on one row. Extreme loop collar closed "pigtail". The second half of the collar is sewn on the front of the work.
Figure 456. A set of loops for the collar "stand"
Figure 457. Stand collar
2. COLLAR ROLIKOVY TRIM (collar "bake")
The neck of the pullover is comfortable to handle leg hosiery knitting. Once a pullover is already stitched and loop neck closed, recruited from the wrong side, on the edge of the neck, an even number of stitches, pulling them from the web. Bake knit hosiery knitting width of 4-6 cm, the Last 2-3 series paper thread. Without closing hinges, remove the knitting from the needles, and Ironing. Bake fold in half and tack to the front side. Related paper thread series spread, and the opened loops sewn to the neckline of the pullover at regular intervals. In this case, the edge will be smooth. It can take teeth.
Figure 458. Collar rolikovy finish
3. "RUCHE"
This collar can be knit 2 ways.
Figure 459. Collar "Ruche"
1st method
For the sample recruited on 30 stitches and knit:
1-St row - 1 front, 1 purl, etc. until the end of the series.
2nd row- 1 air loop, 1 front, 1 air, 1 purl, etc. until the end of the series (air loop make promazyvanie loops between the loops or stitches (in purl row yo crossed);
3rd row- 1 air, 1 front, 1 air, 3 purl, etc. until the end of the series.
4th row- 1 air, 3 front, 1 air, 3 purl, etc. until the end of the series.
5th row- 1 air, 3 front, 1 air, 5 purl, etc. until the end of the series.
6th row- 1 air, 5 front, 1 air, 5 purl, etc. until the end of the series.
7th row- 1 air, front 5, air 1, purl 7, etc. until the end of the series.
8th row- 1 air, front 7, air 1, purl 7, etc. until the end of the series.
9th row- 1 air, front 7, air 1, purl 9 stitches, etc. until the end of the series.
10th row- 9 front, purl 9 stitches, etc. until the end of the row.
For the linked sample determined by the desired number of loops Ruche in the neck. Then knit collar circular knitting needles (or 4 needles).
The 2nd method
The dialed number is equal to twice the number of stitches along the neckline (when set on the edge of the pulling loop between the loops) and knit 1.5-2 cm rubber 1x1.
Then:
The 1st and 3rd rows, 1 purl, 1 front, etc. until the end of the series.
2nd row- 1 wrong, 2 together for the front, 1 yo, etc. until the end of the series.
4th row: 1 purl, 1 yo, 2 together for the front, etc. until the end of the row.
Next, take the needles 0.5 mm bigger and again are finished in a pattern with the 1st to 4th rows. Linking the desired height, close the loop on the front side of the reverse loops. Ready Ruche ironed and neatly sewn along the neckline or zipper.
4. SPORTING A TURTLENECK COLLAR
On the pattern front and back sweater 1.5-2 cm below the line of the neck guide parallel to her line. If a beautiful women's sweater cut "Raglan", not sure on the pattern sleeve to identify the same line. Vymazyvaja details sweaters, hinges on the new line close tightly.
Stitch the sweater, measure the neckline and calculate how many loops for the collar. Elastic 1x1 associate the collar with a height of 12-16 inches on a round knitting (cast on an even number of loops) or normal (odd number of loops). After that, take the spokes on Panamera more and knit facial loops gum facial loops, purl string the additional needle. Since then, the collar kind of comes apart, formed a front, each of which is knitted separately. While reverse loop back of the rack also tally a viscous front, but on both sides of a number is added to 2 loops. Rack height should not be more than six inches, the front part on 1-2 rows longer than the back. The last 2 rows of both parts stand provarite paper thread (this is a temporary series, then they bloom).
Figure 460. Sporting a turtleneck collar
The collar should be round. Therefore, if it is not on a round knitting, stitch it and sew separately, the two parts of the stand (except for rows associated with paper thread). Outwrite the rack without touching the gum. The neck of the sweater, insert between the 2 parts of the rack rear of the rack, apply to the wrong side of the sweater. Release the loops associated with paper thread the opened loop sew seam "back needle" (figure 461).
Figure 461. Attach a collar
Then to the front of the sweater baste the front of the stand collar. Dismissing the rows associated with paper thread, sew the opened loop of the same stitch. Thus, the neck of the sweater will be hidden in the stand collar.
5. COLLAR WITH DECORATIVE CORNERS
This collar and cuffs adorn the dress and blouse very simple style, very simple knit. They are very tight, garter pattern (all rows of front loop).
Figure 462. Collar with decorative corners
First of all measure the length of the neck, add 2-3 cm for landing and 9 cm on both sides, this will be the width of the collar. For example, the length of the neck 36 cm, then the width of the collar 36 cm + 3 cm = 39 cm collar Height 9 cm Hence, you need to dial 39 + 9 + 9 = 57, see Link the sample and determine the density of knitting. Remember how it is done: if in a sample of 30 hinges, width 11 cm, the density of knitting 30 : 11 =2.7 loop at 1 cm when the density of knitting, it is easy to calculate the number of stitches for the first row: 57 x 2.7 = 153,9 loops, or loop 154.
Loop start, dial the number of a thickened thread, the following series regular front provarite viscous thread. On both sides of row nine inches from the edge, mark with a colored thread on the loop, near which it will be necessary to slow down the loop to get the right angles (figure 463).
Figure 463. Knitting patterns
Subtract necessary in every second row promazyvaya of two loops along the front and after the marked loop (promazyvayut the front loop on the front side of the work, and on the wrong side of the knitting photo promazyvaya, the thread is removed before the loop). Subtract necessary until, until the end of the loop side of the collar. Then cropped and wouldn't tavaziva on both sides for 3-4 loops, tie 2-2. 5 cm, then close the loop tightly. Collar Tutuila and sew.
Similarly, you can tie and cuffs.
6. V-NECK
Mesohorny neck begin to knit at the same height, and arm openings. Divide the front of the pullover into 2 parts and knit each separately. In each row, from the neckline do the subtraction to the line of the shoulders. Sew the shoulder seams. Dialed loop around the neck 3 of the spokes, starting from the seam on the left shoulder. Note the loop in the middle of the cut. Promazyvaya in a circle (about 3 cm), diminish (make 3 loops of one) at the 1st loop on the left and right of the Central cutout.
Povezav the bar to the desired height close the loop "pigtail".
Figure 464. V-neck
Figure 465. A set of loops on neckline
Figure 466. Three loops make one
7. NECKLINE "KARE"
We print on 4 needles loops of the back, front and 2 sleeves and knit elastic 1x1, subtracting in each row and 1-th loop (every 2nd row). Linking cutout the desired height, close the loop of "rope".
Figure 467. Neckline "Kare"
8. THE TURTLENECK, WHICH GOES INTO THE HELMET
This collar, knitted long fabric can fit the neck, and can serve you for a hat.
Fit on the basis of the neck (under the throat). We collect the loop on 4 needles and knit in a circle elastic 1x1 double the height of the collar and continue to the height of the head to the crown. After completion of the collar loop close "rope".
Figure 468. The turtleneck, which goes into the helmet
Figure 469. Promazyvanie collar Golf
9. COLLAR POLO
The collar can be knit on 4 needles, on circular.
After crosslinking of the shoulder sections we print on the spokes of a loop of the neck without straps for zipper and knit straight fabric on the tall collar elastic 1x1 or facial surface (you can tie the "rope"). At the end of the loop close "rope", not tightening.
Figure 470. Collar Polo
Figure 471. Promazyvanie collar
10. "OPAL"
Dovlatov the shelf to the neck loop strap, remove the pin and finish the shelf by the scheme pattern. Neck perform a partial knitting. When shelves are ready - sew them. Remove loop strap (on the right shelf) with pins on the needle, then they are finished. The same with a knitting needle in the neck and Rostock, we collect the loop for a collar. Dawasa to the left of the shelves, we translate the loop strap on needle and dokazyvaet a number to the end. Further end collar basic pattern, keeping the edges of the pattern strips. Can the collar to knit pattern trims.
Figure 472. Collar "opal"
Figure 473. Promazyvanie collar
11. SHAWL COLLAR
Shawl collar knit simultaneously with the shelf in the vertical direction or dialing loop from the edge of some shelves in a horizontal direction.
The finished collar is sewn to the product.
Figure 474. Shawl collar
12. USEFUL TIPS
Binding of the collar can to do to separate the spokes and to the ring.
Tasteful collar, and beautiful, will decorate any associated product.
Therefore, the design of this part of the product must be approached carefully.