You'll need
Pants light linen or cotton; silk floss in 3 addition light pink, pink, dark pink, light green colors; scissors; embroidery needle, the scheme of the pattern in full size, tracing paper, copy paper.
Progress
The pattern will be sewn into the side seams of the pants. For it using a surface with a "deck", split, slip the mesh seams "cross", "forward needle", stalked.
Transfer the circuit pattern on tracing paper, then using carbon paper on the fabric.
Start to do the embroidery with large flowers. All petals complete the stitch straight and slanted stitches. The top petal embroider dark pink vertical stitches. Two internal overlapping petals fill in the slanted stitches in the same color. The two bottom petals embroider the horizontal stitches with a thread of pink. Outer petals radiating around, complete with light pink thread with straight stitches along the petals. The smallest petals pink thread embroider overlay grid. First, put a few parallel horizontal stitches, then place them over the vertical stitches. X secure the connections. Two other flower do the same.
Berries embroider the surface with a "deck". First panel contour seam "forward needle". Then inside the loop do a few simple stitches horizontally. Then, close the "floor" gladeville vertical stitches.
Large leaves complete the stitch in the split thread light green color. Circle the edge of the leaf seam "forward needle". Then, make a "deck" in the form of longitudinal stitches. Follow in place of a split leaf 2 parallel stitch, then fill in the pattern. First, embroider the integer part of the leaf to split. Then fill the first 1 side then the other, performing punctures between the parallel stitches.
Small leaves embroider slanted stitches. A curved twig, run, seam "cross". The needle with the working thread print on the front side in the lower corner at the base of the twigs. Make a diagonal stitch from left to right and from bottom to top. Using the wrong side of the pull the needle with the working thread at the bottom line and make the 2nd diagonal stitch, completing a cross. You can first lay a row of stitches slanting in one direction with a slope to the right. On the return stroke embroider some stitches with a slope to the left that overlaps the first.
The strands of embroider stalked seam. All stitches are put at a slight angle and start in the middle of the previous one. On the 2nd leg of the pants embroider the same pattern (Fig. 83).
Figure 83. Embroidered pants