Treatment tucks

Tuck in sewing products are used to ensure conformance of the product in the waist area, providing three-dimensional form on the convexity of the chest, shoulder blades, and so on. Tuck you can go from cut parts, can be located inside the details.
Treatment tucks
Tuck in outerwear perform the split, and their allowances rautureau.
Treatment tucks
The products of the light assortment of Darts is usually continuous. In the process tuck can autoimatic to the center parts
Treatment tucks
or the upper sections, or razorujaemsa
Treatment tucks
The General sequence of processing operations tuck the following:
1. To identify the location of the Darts on the details. Technical specifications (TU): on the reverse side of the support mold 3 lines: 1 - mid-tuck, 2 - tuck side, 3-the bounding line.
Treatment tucks
2. Baste the tuck. TU: straight hand stitches from the top tuck the slices, folding detail face inward line 1 laying line 1 mm from line 2. The color of thread – contrast; 3. Sew a tuck. TU: from the cut to the top, strictly in line 2, bringing the line out at the intersection of the lines 3,1 and 2; 4. Remove the thread to the temporary duty assignment. TU: slitting 3 cm, removing the peg; 5. To press the dart.TU: laying the allowances to the middle of the part simultaneously satwiwa area at the top of the Darts in the circular motion of the iron, slightly moistening.
In the mass production of clothes when stitching Darts at the tops of the Darts do a straight set triple back stitch length of 7-8 m. When producing an individual instead of tacking thread can tie a knot. Region vesina tuck stuivers to vertex not sharply protrude above the surface of the part. In some cases, for example, when processing of loose materials, poorly preserves the shape obtained at the WTO, the top tuck can be fixed with a piece of adhesive strip.
Treatment tucks

Add comment

Security code
Refresh