Treatment of the skirt: the upper section with the facing

Processing of the upper edge of the skirt facing are shown in the figures:
Treatment of the skirt: the upper section with the facing
Treatment of the skirt: the upper section with the facing
Designations on the scheme: From the main fabric And the front panel of the skirt; B - facing; gasket material: - gasket piping. Obtachku cut out the shape of the skirt in the region of the upper edge, of a width of 5-6 see
The processing sequence in the following table:


№PP the Name of technologically indivisible operations specifications Sketch 1. To duplicate the facing and allowances for processing fasteners of the skirt with adhesive strip on the reverse side
Treatment of the skirt: the upper section with the facing

2. To pricecat the side sections of the piping to the allowances for processing fasteners of the skirt Folding right sides inward, equating sections, sh.sh. 0,8-1 see


Treatment of the skirt: the upper section with the facing
3. To resaturate seam allowances primaqiune piping to the allowances for processing fasteners of the skirt From the wrong side until it is tight

Treatment of the skirt: the upper section with the facing
4. Neaten the slices of the allowance for processing fasteners of the skirt and the lower section of piping skirt With front side at one time 5. To oblachat upper edge of the skirt facing to the skirt Folding parts, right sides inside, equalizing sections, sh.sh. 7 mm 6. To turn the facing to the skirt on the wrong side of the skirt Straightening corners

Treatment of the skirt: the upper section with the facing
7. Pritority the upper edge of the skirt With side piping, straightening Kant from skirts 1.5 mm 8. To stitch a finishing stitch along the top edge of the skirt sh, sh. 5 mm front side (can assign a method to a clean edge)

Attachment of braid-zipper is made according to the General rules. There are two ways: 1) ribbon, zipper pritachivajut after grinding the upper edge of the skirt, bending the upper sections of 0.5 - 0.7 cm inside and gastrochef them . Line of zatrachivaniya must coincide with the finishing line at the upper edge of the skirt. Allowed suturing the bent edges of the tape stitches blind stitch
Treatment of the skirt: the upper section with the facing

2) the upper sections of the tape of the zipper should fall into the joint, grinding of the upper edge of the skirt. In this case, first pritachivajut the zipper, and then treated with the upper edge of the skirt facing.
Treatment of the skirt: the upper section with the facing

Add comment

Security code
Refresh