The zipper can be located in the upper part of the left side seam, medium seam of the back or front cloth.
The zipper can be connected to the skirt in various ways:
- pritchina at the same distance from the bends (a);
- pritchina with displacement units in the direction of the front cloth of the skirt (b);
- pritchina through the edge of the zipper on the skirt – clasp and a hidden braid and the zipper (b).
Processing of fasteners on the braid-zipper with a symmetrical arrangement of teeth 
(at the same distance from the bends) are given in the table
№ PP the Name of technologically indivisible operations specifications, a Sketch, figure 1. Neaten the side sections of the front and rear cloth skirts From the front side
2. Outline the length of your clasp ready to Chalk mark 1.5 - 2 cm shorter than the used tape zipper 3. Sew the side sections of the skirt Folding front sides inward, sh.sh. 1-1. 5 cm, not grinding off the plot of the clasp 4. To resaturate the side seams of the skirt With the wrong side until it is tight, at the same time soutourina allowances on the treatment of the clasp of the skirt inside-out 1-1,5 cm
5. To pricecat the braid - zipper skirt Enclosing the braid-lightning castle to the front side of the seam allowance so that the links were located strictly between the folds of the seam allowance on the clasp and was not visible from the front side of the skirt, the upper latch on 1.5 cm from the upper edge of the skirt; sh.sh. 0,4 - 0,7 cm in one step using odnorazovoe foot
6. Pritority the clasp of the skirt. From the front side through protohellenic, moisturizing
Processing of fasteners on the braid-zipper with an offset arrangement of the teeth differs from the previous method of processing only in the technical specifications for operation "Pricecat the braid-the zipper to the skirt: press under the cut of the rear cloth skirts enclose the right part of the open zipper teeth butt to the bend of the allowance and pritachivajut sh.sh. 2 mm. and Then close the zipper and continuing the line, pass through the links of the clasp and pritachivajut to the front panel of the sh.sh. Of 0.7-1.1 cm" 
Processing of hidden fasteners is shown in figure:
At the time of accession clasps the side sections of the skirt serged side seam stachen to the mark and resutured, septugenarian of allowances for processing fasteners.
№ PP the Name of technologically indivisible operations specifications, a Sketch, figure 1. To put the control signs in the area of the closure skirt From the front, lining up the bend allowances destacando plot on the skirt, performing a perpendicular line press the edges
2. To pricecat one side and a hidden lace-zipper to the skirt On the front side on the seam allowance when placing the zipper face down and tilting the links, primativa along the entire length, making the line as close to the links using specapc.
3. To pricecat the second part of the braid-zipper Closing the zip and locking it in the free seam allowance with a pin around the upper edge of the skirt, balancing control signs. Opening the zipper on the entire length, primativa its second side to the skirt, positioning the line as close to the links.
4. Topstitch the sides of the braid-zipper On the seam allowances of the skirt, sh.sh. 0.1 — 0.2 cm
5. Priotity node From the front side. through protohellenic, moisturizing