Side Welt pockets with leaflets with nastronie ends

Side Welt pockets with leaflets with nastronie ends is often used in raincoats and jackets, but can be handled in jackets and coats.
Side Welt pockets with leaflets with nastronie ends

The processing circuit indicating the details of the cut is shown in figure:
Side Welt pockets with leaflets with nastronie ends
Designations on the scheme:
from the main fabric:
A-before;
B – leaf;
from the lining fabric:
In part of the lining of the pocket;
D – the lining of the pocket;
of cushioning material:
D – dolevik;
E – strip the leaves.

Configuration details of the cut required for the processing node and n. n. they are presented in the table:
The part name is Sketch the Direction of the warp threads of the main fabric Before
Side Welt pockets with leaflets with nastronie ends

Parallel to cut the side below the top side of the loop

Leaf
Side Welt pockets with leaflets with nastronie ends
Along of the part (fabrics with a NAP, directional pattern, color variation – both in the front)


From lining fabric 1 part of the lining of the pocket
Side Welt pockets with leaflets with nastronie ends

Deep pockets
Part 2 lining pockets
Side Welt pockets with leaflets with nastronie ends

Deep pockets
Of adhesive material Dolevik
Side Welt pockets with leaflets with nastronie ends
Along details
Strip the leaves
Side Welt pockets with leaflets with nastronie ends
Along details

Processing flow chart indicating the order of execution of srocc caught in the cross-section shown in figure:
Side Welt pockets with leaflets with nastronie ends

The processing sequence of the pocket is represented in instructional technology the map

№ p/p the Name of technologically indivisible operation THAT Sketch 1. To identify the location of the pocket on the front With the front side mold 3 lines (longitudinal line is a line of primaqiune leaves, between the lateral length of the pocket)
Side Welt pockets with leaflets with nastronie ends
2. Stick dolevik to the front With reverse side in the location of the pocket symmetrically relative to the transverse of the planned lines and shifted by 23 in the side of the cut relative to the longitudinal line
Side Welt pockets with leaflets with nastronie ends
3.Duplicate slip adhesive strip
On the reverse side
Side Welt pockets with leaflets with nastronie ends
4. To oblachat upper and lower sides of the leaves Folding the leaf in half lengthwise face inward, sh.sh. 0.5-0.7 cm
Side Welt pockets with leaflets with nastronie ends
5. Trim the seam allowances grinding of the lateral sides of the leaves At the corners, not reaching line of 1.5 mm

6. Remove the piece of paper on the front side of the Straightening corners
Side Welt pockets with leaflets with nastronie ends
7.Pritority the leaflet With the side politoski through protohellenic, moisturizing

8. Outline on a piece of paper the width in finished form From the bend

9. To pritchet part of the lining of a pocket to a piece of paper Enclosing the pocket lining with side politoski with symmetrical output pads over the lateral side of the leaves, equalizing sections, participant on the planned line
Side Welt pockets with leaflets with nastronie ends
To pricecat the piece with the pocket lining to the front Stacking leaflets to the front side of the front, fold the cut sides, equating a longitudinal intended line with the stitching on the lining and lateral side slips with cross-scheduled lines, primativa in place on the lining starting and ending at the level of the transverse lines
Side Welt pockets with leaflets with nastronie ends
11. To pricecat the second part of the lining pocket to the front Putting face of the inside longitudinal section of the lining to the seam at the butt of primaqiune leaves, sh.sh. 1 cm, starting and ending at the level of the transverse lines
Side Welt pockets with leaflets with nastronie ends
12. To check the quality of previous operations Lines from the dolevik should be parallel, natinality and scalciata at the same level, the distance between them is 1 cm
Side Welt pockets with leaflets with nastronie ends
13. To cut the pocket in the Middle between the lines, not reaching the transverse lines 1 cm, cutting Napoli, nedohoda to thread line 1.5 mm

14. Remove the lining of the pocket on the wrong side of the front Veraplaya seams
Side Welt pockets with leaflets with nastronie ends
15. Pritority the pocket Removing blemishes, sagging fabric at seams, pressing the corners of the cut pockets between the leaflets and the second part of the lining of the pocket

16.Sew the lining pocket sh. sh. 1 cm from the ends of the lines of primaqiune leaves
Side Welt pockets with leaflets with nastronie ends
17. Topstitch the ends of the leaves on before sh. sh. 1-2 mm, simultaneously consolidating the corners of the cut of the pocket
Side Welt pockets with leaflets with nastronie ends
18. Priotity pocket are the front and inside, through protohellenic wetting 19. To test the quality of the machining of the pocket Piece the same width, the ends are parallel and correctly executed WTO
Side Welt pockets with leaflets with nastronie ends

Add comment

Security code
Refresh