The curtains on the grommets serve not only the interior decorative design of the window, but demarcate areas into zones and space
Sketch Of Living Room
Eyelets - this is one of the best ways to enhance the beauty of the fabric. Expressive soft vertical folds, which are formed with eyelets will perfectly decorate the window.
Fullness of curtains on the grommet (the coefficient of the Assembly on the roof) must be not less than 1:2. Every painting must be a clear amount of eyelets, then right and left edge of the curtain will be rotated in the same direction.
The upper edge of the curtain (10 - 20 cm) place grommet machine - glued interlining, proclaming, eyelet punching tape
The recommended distance from the center of eyelet punching holes to the upper edge of the curtains and to the side edges on both sides - 5 cm Location (center of hole) rest of the eyelets must be correctly calculated. The width of the curtain minus 6 cm (on the processing side of the sections) minus 5 x 2 (side eyelets), the remaining width of the fabric divided by the number of grommets minus 1. Get the distance between the centers of eyelet punching holes.
Optimalnoe distance between the centers of the eyelet punching holes - 18 see
Minimum - 15cm, maximum - 22 cm eyelet punching holes are cut with a special device - with a punch.
stock for eyelets glue
on the curtains are mark only an even number of eyelets (4-6-8-10-12 etc.)