When choosing fabric for making curtains and a drawstring closure you need to choose the type of round the cornice and its diameter. Depends on the style of the model.
Sketch of the curtain and a drawstring closure. Through fastening, a cornice runs through the drawstring in the fabric.
The curtains on kuliske are also one of the types is simple, straight curtains. They can be long (to the floor), drape in soft folds to the floor, and the same to be done in the style of "cafe". This so-called "grandma's curtain" - from the middle of the window to the window sill.
In contrast to direct curtains on the mounting tape, which are fastened to the eaves with hooks, curtains and a drawstring closure are placed directly on a round, wooden or metal curtain rod (rod). Therefore, when calculating the fabric for the height of the curtains not only take into account the allowances for processing lower edge of the curtain (10 - 20 cm), and double allowance for the diameter of the ledge, plus 0.5 - 1 cm on the freedom of movement of the curtain along the eaves.
Also better the model will look with the ruffles (scallop) over the drawstring. This will create an elegant perfection of the upper edge of the curtains. Ruche is also performed twice. Height sizes range from 1.5 to 7 cm.
To determine the width of the curtains measure the length of the eaves and multiply by the coefficient of the Assembly 1,5; 1,8; 2; 2,5.
Allowances
(1) double allowance on kulisku (diameter ledge - 2,5; 3,6 etc. + 0.5 - 1 cm)
(2) - double h Ruche (scallop) (1.5 to 7 cm)
(3) - lateral allowance for processing (3 - 4cm)
(4) - allowance for processing lower edge of the curtain (5 x 5; 7 x 7; 10 x 10 cm)
limiter (fleron) along the eaves