Loop, taken from the left needle to the right nepovezane, called shot (extended). Taken loop is divided into short and long. Pulling loop to a height of 1-2 rows, get short. Pulling loop to a height of 4-6 rows long. The loop is stretched to a height of 2 rows, called a double shot (extended), and to a height of 3 series - triple shot (extended). The hinges can be removed for both front and on the reverse side.
2. Taken (elongated) loop with nakida (short loop)
Short shot (elongated) loop front side in the following way: the needle is introduced into the loop from right to left and remove it from the left spokes on the right not promazyvaya. Working thread can be placed in front of the needle (figure 184) and after it (figure 185).
Figure 184. Working thread in front of needle
Figure 185. Working thread behind the needle
When promazyvanie removed (elongated) loops from the wrong side knit purl her, while grabbing behind the rear wall of the loop. Removed (elongated) loop from the wrong side of the work are finished on the front side of the front wall. Carefully ensure that the loop is not twisted.
3. Taken (extended) twisted loop (long loop shot)
Long shot of the loop from the front side in the following way: inserting the needle into the loop from left to right (the working thread lies on the index finger) and the end of the right needle to wrap a few times working thread counter-clockwise. Thereafter, the needle thread to pass back to the loop (be careful to score the coils from slipping off) and remove the knit loop on the left spokes on the right (figure 186).
Figure 186. Long shot loop
In the following rows this loop removed nepovezane, inserting needle from right to left. Products made pattern with removed loops in knitting look thicker and lusher usual. Using shot loops and colored threads, you can get a large variety of different patterns.
4. Taken (elongated) loop, along with several nicodemi
Taken loop with several brides used to produce more visible knit. In some patterns the same loop can be removed no promazyvaya in 2, 3 or more rows (figures 187, 188). The number of nakido corresponds to the number of rows. To purl into the front loop filmed with multiple brides, input to the right needle from the front side of work from left to right under all nakedy and through the beam pulling a new loop (figures 189, 190).
Figure 187. Beveled loop with nakida
Figure 188. Promazyvanie loop with nakida
Figure 189. Beveled hinge with 2 yo
Figure 190. Promazyvanie loop with 2 yo
Taken loop not to be throwing the yo on the needle.
Right needle introduced from the front side of the work, a number below the first front loop on the left needle (needle can enter and under the front and under the wrong loop). Pull a new loop, and the upper resettable neprovodiva (figure 191). Reset loop forms yo.
Figure 191. Insertion of needles under the wrong loop
5. Permutation two loops
Swap two loops - this means to change the order of promazyvanija these loops (provasa 2nd, knit the first, etc.). After permutation of the loops located on the canvas with an inclination in one direction or another.
Figure 192. Seizure of 2 loops with an inclination to the right
Figure 193. Permutation of 2 loops with an inclination to the right
Permutation two loops can be done in the following way: the 1st and 2nd loop remove (from the 2nd) for the front wall from left needle to right not promazyvaya. Return them to left needle so that the 2nd loop was the 1st. After that are finished each loop separately.
Permutation two loops can be done in another way.
Figure 194. Capture 2 loops with a slope to the left
Figure 195. Permutation of 2 loops with a slope to the left
Relief mated with a permutation of the loops
Recruit 22 loop (including 2 edge) and knit:
- 1st row - 3 purl, 2 loops off nepovezane on the right needle, and then put them on the left, but switch to the former on the front needle 2nd loop was on top; then both loops promazyvayut facial, 2 purl, 1 facial, 4 purl, 1 front, 2 purl, 2 loop interchange and knit the front, purl 3;
- 2nd and all even rows - purl loops removed nepovezane, the thread stretch on the underside of the work;
- 3rd row: 2 purl, 1 purl and 1 front swap (with the needle) so that the front hinge was on top, and knit in pattern; 1 front and 1 reverse switch (before the needle) and knit in pattern; purl 1; obverse 1; reverse 4; 1 facial; 1 purl; 1 purl and 1 front swap (with the needle) and knit in pattern; 1 front and 1 reverse switch (before the needle) and knit in pattern; purl 2;
- 5th row: 1 purl; 1 purl and 1 front swap (with the needle) and knit in pattern; purl 2; 1 front and 1 reverse switch (before the needle) and knit in pattern; 1 front and 1 reverse switch (before the needle) and knit in pattern; purl 2; purl 1 front and 1 change places (with the needle) and knit in pattern; 1 purl and 1 front swap (with the needle) and knit in pattern; purl 2; 1 front and 1 reverse switch (before the needle) and knit in pattern; purl 1;
- 7th row: 1 purl; 1 obverse; 4 reverse; obverse 1; reverse 1; 1 obverse and 1 reverse switch (before the needle) and knit in pattern; 1 purl and 1 front swap (with the needle) and knit in pattern; 1 reverse; 1 obverse; 4 reverse; obverse 1; reverse 1;
- 9th row: 1 purl; 1 obverse; 4 reverse; obverse 1; reverse 2; 2 front swap there and knit; purl 2; 1 obverse; 4 reverse; obverse 1; reverse 1;
- 11th row-purl 1; obverse 1; reverse 4; 1 facial; 1 purl; 1 purl and 1 front swap (with the needle) and knit in pattern; 1 front and 1 reverse switch (before the needle) and knit in pattern; 1 reverse; 1 obverse; 4 reverse; obverse 1; reverse 1;
- 13th row: 1 purl; 1 purl 1 front and change places (in front of needle) and knit in pattern; purl 2; purl 1 front and 1 change places (with the needle) and knit in pattern; 1 purl and 1 front swap (with the needle) and knit in pattern; purl 2; 1 front and 1 reverse switch (before the needle) and knit in pattern; 1 front and 1 reverse switch (before the needle) and knit in pattern; purl 2; purl and 1 front swap (with the needle) and knit in pattern; purl 1;
- 15th row: 2 purl; 1 purl and 1 front swap (in front of needle) and knit in pattern; 1 purl and 1 front swap (with the needle) and knit in pattern; purl 1; obverse 1; reverse 4; 1 facial; 1 purl; 1 purl and 1 front swap (in front of needle) and knit in pattern; 1 purl and 1 front swap (with the needle) and knit in pattern; purl 2;
- From the 17th row pattern repeat, starting with the 1st row.
Figure 196.
6. Useful tips
Knitted products with the removal (elongated) loops are deformed in the wash, so to use these loops in products that quickly become dirty, do not recommend.
Using a short loop, when the wrong binding, you should purl into the front beveled back loop.