For the connection of finished parts products use a special knit stitches: to connect horizontally, vertically and welding the seams. When knitting the knitted stitches of the connecting of parts is nearly invisible. Knit stitches are at the front of the unit, and the patterns of the parts can be precisely combined with each other.
Horizontal knit stitch is used to join parts of socks knitting for open loop.
To sew the parts lying freely and not dismissed, they promazyvayut few rows (4-10) of the additional thread priorivet the edge parts through a damp cloth, and before performing the weld rows of extra threads dissolve.
Open the loops of both parts have against each other and sew them together from right to left across the face of the thread of the same color and thickness, which wove the details.
To do this, the needle is introduced upwards from the inside on the front in the 1st loop of the bottom row.
Then top to bottom on the front side on the reverse of the 1-th loop of the top row and immediately deduce it from the bottom up in standing next to the 2nd loop of the top row.
Insert the needle top to bottom on the front side on the reverse of the 1-th loop of the bottom row and immediately deduce it from the bottom up in standing next to the 2nd loop of the bottom row. Then from the top down to the 2nd loop of the top row, and the output of bottom-up standing next to the 3rd loop, etc.
Loop of the seam should be the same size as the hinge leaf. Only under this condition, the seam will be completely invisible.
If you sew the parts are connected by rubber 1x1, then when connecting you can use the same method. To do this, placing the loop against each other, connect only the front loop, skipping the other. Then turn knitting purl side facing you and sew the rest of the loop in the same stitch (on wrong side they face).
Union equity and the transverse leaf.
The details of the stitch from right to left across the face of the horizontal knit stitch, inserting the needle through the open loop of one blade and grabbing the arc of the loops located near the edge of another fabric.
Such a compound is used, for example when sewing the sleeves into the armhole.
Vertical knit stitch is used for connection knitted details along the edges of the canvas.
Bead perform top to bottom on the front side thread of the same color and thickness (a little thinner), which knit the fabric. On the front side to get a clear connection of the looped column.
To do this, introduce the needle under the top two broach between edge and the adjacent loop of the left part. Then movement "on itself", enter it under the top two broach between edge and the adjacent hinge right part.
So grab the needle at the two pulling alternately on one, then on another part
The margin for the seam in this case are edge loops. When knitting very fine threads, you can capture not broach between edge and the 1st loop, and then - for example, between the 1st and 2nd loops or even further. The thread to pull it too tight, since the joint must remain elastic.
Kettely seam used to attach small parts to the major: bakey, pockets, straps. Cattalini sometimes cover the seam loops of the last row (4th method closing). The technique is based on performing manual seam "back needle", which is used when sewing instead of machine stitching.
The edge detailthat you want to prittlewell, finish (or start) several rows of extra thread. Then the edge priorivet through a damp cloth, spreading the rows of extra threads. Details primetyvajut to the front side of the product for the intended line.
Bead perform thread the same color as the item, but preferably thinner.
In addition to simple Kettering seam there are curly having, when open loops are sewn so that they were connected by two or three. The principle of the execution of this seam the same as usual kettling. Figured having the decorate women's and children's clothing.
Insert the needle up from the bottom on the reverse side at the front through the canvas in the 2nd loop of the open range (Fig. ). Insert the needle from top to bottom in the 1st loop and, grasping the fabric, is removed in the 4th loop, skipping the 2nd and 3rd loops. Then insert the needle on top of the 3rd, and the output of the 6-th loop, etc., inserting the needle into the loop back from the thread and bringing through two loops forward (Fig. ).
Insert the needle up from the bottom on the reverse side at the front through the canvas in the 2nd loop of the open range (Fig. ). Insert the needle from top to bottom in the 1st loop and not grabbing the fabric, is removed in the 3rd loop, skipping the 2nd. Both loops, the 1st and 3rd, while slightly tightening. Insert the needle from the top down in the 2 nd loop, grasping the fabric, remove the 5th (center of the next beam), etc., inserting the needle into the back loop, and outputting so that the beams of the three loops.
For the connection of the knitted parts used manual seam "back needle" which is always performed on the reverse side of the product. Parts are folded with each other, right sides and sew seam "back needle". Done this way the seam will not be as flat as knitted.
Also for the stitching detail, I used a short hook. Folding details face-to-face edges of the parts povazay details prostovisa.
In addition to the article I recommend to watch the video "Knit stitches and ways of their implementation".
Knit stitches : a vertical seam, horizontal seam, the seam "loop in loop", kettely seam