You'll need
Harsh canvas dimensions 40 X 61 cm; floss 3-4 adding 4 colors: blue, blue, blue, dark blue; diagram of the pattern in full size; embroidery needle; embroidery Hoop; tracing paper; transfer paper; pencil.
Progress
The scheme of the pattern in full size transfer on tracing paper. Copy paper put on the front side of harsh cloth and cover with a tracing paper pattern. A sharpened pencil, move the drawing from tracing paper to fabric. Remove the tracing paper and carbon paper, and tuck the fabric in the Hoop.
Now move on to embroidery. Motif embroidered satin stitch, chain stitch, by gladium roller polypetalae with pakracani, seam "doughnut", openwork "punk", stalk stitch.
Start to embroider with leaves. Pull the needle and thread floss blue on the front side at the base of the Central leaf on the right side and make a stitch diagonally towards the middle. Using the wrong side bring the needle and thread on the front side near the beginning of the 1st stitch and make the 2nd stitch parallel to the first. Put the remaining stitches the same way, fully repeating the outline of the half leaf. The second half of embroider in the same way as the 1st, starting from the tip of the leaf to its base.
Embroider polumetally with pakracani around the leaf light blue thread, starting at the base of the leaf. The seam should go from left to right. Pull the needle and thread on the front side and form a small loop. Push the needle on the wrong side at a small distance from the filament, and withdraw the needle with the working thread on the front side. In the middle of the 1st stitch, make a short prakrama and go back to the end point of polumetally on the front side, making the stitch on the wrong side.
Lateral leaflets embroider the same pattern, filling the contours of the leaf a blue thread, and polumetally with pakracani blue.
Any ornament should always be associated with the form of the decorated embroidery products. In addition, it depends on the structure and density of cloth warp.
Follow the stems to the leaves and chain stitch. Pulling a needle with dark blue thread in 3 addition on the front side at the beginning of the stem and form a loop. Pierce the fabric close to the exit point of the filament, and withdraw the needle with thread in the middle of the loops so that she was under the needle. Likewise embroider the 2nd loop. Every once pull a needle on the front side exactly in the middle of the previous loops. As a result, you get a chain. First, run the Central stalk, then the side, starting each of them accurately from the previous stitch. For this, a needle thread pull on the front side exactly at the point the base of the loops.
Now embroider the flowers. Follow the contours of the petals and flowers mid-seam "forward needle". Use the floss thread in 3 addition dark blue color. The middle complete the "knots". Why bring the needle with floss thread 4 adding the light blue color on the front side. Position the needle parallel to the fabric and obviate her 2-3 times of the working thread. Insert the needle into the fabric and pull the thread supporting turns. Gently tighten the knots. All the knots position very close to each other. You can combine the knots, made of light blue and blue thread.
Short petals complete unilateral surface. Stitch, start at the base of the petal and end at its edge. Make a tiny stitch on the wrong side and return on the front side at a distance of 1-2 mm from the 1st stitch. Turn the needle with the working thread 180° and pierce the fabric at the middle of the flower. Then run along the underside of the stitch length 1-2 mm. So fill in the contours of the small petals.
Large petals embroider eyelets with with strong. Each loop start from the middle of the flower. Prakrama do at the end of the petal.
The combination of the following colors of the flower make a few others. Mid-run dark blue and blue threads. Large petals embroider light blue thread, and the little petals are blue color.
Berries make seam "doughnut". First mark a contour seam "forward a needle" dark blue thread. Then run the "deck" thread of the same color in 3 addition. Then make stitches bilateral surface. Place them crosswise stitches "flooring". Berries must be dark blue and light blue. The motive is ready. Do the same all the grounds around the perimeter of the napkin.
In the next phase of work stalked seam highlight the internal border of the pattern blue thread in 4 additions. Start it from the corner. On the front side make a small stitch on the diagonal to the intended line. Using the wrong side of the back there, moving the needle with the working thread in the middle of the 1st stitch. Make the 2nd stitch parallel 1. The remaining stitches are exactly the same. They should fit snugly to each other. When he reached the corner, turn the needle 90°. The first stitches of the next line should slightly overlap the last stitches of the previous one.
At a distance of 4.5 cm from the edge, run the openwork "punk." From the intended line 2 sides of the back 2 of the thread and trim the following 5 strands. Pull the threads of the fabric. Dark blue thread in 3 addition attach to the corner of the frayed and print on the front side in the lower part nevidannoy of heirloom. Make a stitch from the bottom up. The needle with the working thread obvate 4-5 threads of the fabric and bring the needle to the front side using 5-6 strands from 1 stitch by running on the wrong side of the diagonal stitch from the top down. Go back to the exit point of thread at the front side, tighten the bottom threads of the fabric and make a diagonal stitch from the bottom up on the wrong side. As a result, on the front side you get 2 parallel lines of stitches, and purl cross — shaped line of stitches.
Pull the edges frayed the remaining threads of the fabric for the fringe.
Together with the cloth can embroider a tablecloth and with the same motive. Why in the middle of the tablecloth you will need to mark a square or rectangle larger. The motive should slightly increase, ascertive sketch on the squares (Fig. 54).
Figure 54. Cloth "Blue flowers"