Zigzag Darts create a contoured line of the bodice (figure 376). With such Darts the rest of the bodice needs to be classic style.
Bodice with zigzag tuck from the shoulder cut. Top tuck first you need to transfer to another place. Figure 377 top tuck was transferred to the tuck of the waist line.
Close the tuck, put the pattern into a figure and draw a zigzag line tuck. Put the mold on the table and specify the line tuck. Cut the pattern along this line and close the dart from the waist line (figure 378).
The connection sections so tuck begin in a straight line from point R to nasechek A and b, and then on a curve. The line Darts from the front of the bodice to lay the finishing line.
The bodice is straight cut (no Darts from waist line) tuck the upper to translate into a tuck from the side of the slice. You then cut a zigzag pattern on the tuck (figure 379) and close the tuck from the side of the slice (figure 380).
The attached bodice (with the tuck of the waist line) with zigzag tuck from the line of openings (figure 381). Turn the upper tuck in tuck from the side of the cut, cut the pattern along the zigzag lines and close the top tuck (figure 382). Close the tuck of the waist line to get the correct location all lines tuck.
In all examples, the solution tucks In enough to sew a tuck.
The bodice of adjoining silhouette with a zigzag Darts and peplum shift (figure 383). On the patterns of the bodice with peplum and cap the tuck of the waist line, draw line tuck (figure 384), by placing a curve on the figure.
Cut Darts at the level of the peplum (the shaded part between a And b). Cut the pattern along the zigzag line to the point P and close the tuck from point R to the waist line. This will overlay the left and right sides of the peplum of one another (figure 385, the notch A and b). Its magnitude depends on the solution tucks from the waist line.
To expand on the value of the peplum overlay of its parts, it is necessary to add a triangular gusset of the same size. Will zakruglenie top corner gussets, and extend it to 0,5 cm on each side for receiving the seam.
Peplum cut in the middle section of the overlay and draw two vertical lines with distance between them of 0.8-1 cm (figure 386). On these lines, insert the gusset in Basque.