When performing oblique stitches in the place of stitch visible row of inclined to the direction of the run of segments parallel to each other or under a certain angle to each other. Slanting stitches include basting, vymetaya, blanket stitch, blind stitch, quilting, stykovochnye.
Slant basting stitches are used when you want to get a stable connection of the parts, as slanting stitches eliminate the possibility of shifting of parts during processing.
Basting a line of slanting stitches more elastic and prevents stretching of the tissues, more firmly secures the fit of the fabric, basting than stitching straight stitches.
Stitch length of 0.7-2 cm Slant stitches in basting lines used in namatanai shelves on the side strip parallel to the armhole and the neckline, while namachivaya of podborov and collar.
Details of a fabric with stripes and cage connects basting a line of straight stitches, as in the oblique sutures in the process of wet-heat treatment may distort the pattern in the result of the contraction of crosswise lines.
Slant vymetaya stitches are executed after processing (grinding) the edges of a part before the WTO or laying the finishing line. When you perform the buttonhole detail, from which you want the edge on the edge (valve in front of the plot Board and padbolt on the part of the lapel, top collar, etc.), located at the bottom. Kant desired width of the straightened fingers of the left hand and immediately fixed with stitches.
The movement of the needle - from yourself, from right to left. The length of the stitches of 5-10 mm, frequency 3-1,5 1 cm lines, the distance between the stitches of 5-7 mm.
Slant overlock stitches are used to protect the cut parts from fraying. To perform overlock stitch slant stitch needle underneath the fabric and removed from the top. The line lay from right to left. The stitches don't tighten. The frequency of 3-4 stitches per 1 cm Length of the stitches of 0.5-0.7 cm Distance between the punctures from the cut parts of 0.3-0.5 cm eyelet perform cotton thread No. 50-80 or silk No. 65, 75.
Slant blind stitch the stitches used to attach the bent edges of the parts with the open cut in the products of easypayday fabrics in the manufacture of clothing. In the products of thin crumbling tissues (of dress) blind stitch the stitch used to attach the bent edges of the parts with a shut cut.
Lead the needle into the fabric about the bent of the slice by piercing the core part half the thickness of the fabric, and bent cut on the entire thickness. The next stitch the needle is re-injected into the bottom layer of tissue at the first puncture in the ACC or 0.2-0.3 cm to the left of it. Thread not much delay. Frequency of 2-4 stitches at 1 cm Distance from the puncture needle to slice filed tissue of 0.2-0.3 cm to the bent edges of the open cut to 0.1 cm at the bent edges with a shut cut. Stitch length of 0.3-0.5 cm.
Quilting stitch slanting stitch used to join the major part of the cushioning in the processing of outerwear in order to give stability and elasticity of separate sections of the equipment (lapel, collar, etc.). The treated area of the part holding the weight of the left hand perpendicular to his body, and lines are laid from the top down and bottom up. Thus the top of the joined tissue to pierce through, and the bottom - half its thickness, i.e. capture one or two strings.
When you execute these lines, the index finger of the left hand controls the puncture depth of the bottom part. Thread stitches are only visible from the front side. From the bottom detail of the punctures should not be visible, it is recommended the thread tight do not tighten. Lines have parallel rows. The top fabric slightly pokazyvajut. Lines perform from the side of the cushioning parts thread No. 40-80 in color of the basic material. Stitch length and distance between lines should be 0.5-1 cm, width 0.3-0.5 cm depending on the operation. In some cases, such as when you stitch the hair strips, quilting lines can be continuous.
Slant stykovochnye stitches used for invisible connection of parts of the dense, easypayday tissues in locations of accidental cutting or tearing. Parts are arranged face-down, butt-cuts, combining the drawing; insert the needle into the fabric at a distance of 0.2-0.3 cm from the cut edge and, piercing it through and through, they need to cut. It is necessary that the stitches are tightly connected sections, but were not visible from the front side. The seam from the inside priorivet, and the front of the needle gently lift the pile. Frequency 5-7 stitches 1 cm
Carry out lines of silk thread in the color of the fabric, with the distance between the stitches of 0.1-0.2 see