This magical fairy will make a note to any celebration. She can decorate a Christmas tree or birthday cake in birthday. Maybe it is better to float in the window, shimmering and sparking? The body of the fairies consists of a wire frame, which is attached by a graceful glass head. Dress is hand-knitted from thin wires, a glass slipper — oblong beads, transparent wings cut from a plastic bottle.
MATERIALS
beads — silver and green beads for the shoes and eyes, in the form of a heart
enameled copper wire, pink and silver colors
the fabric and the thin foil for the dress
two discs of frosted glass for the head
galvanized steel wire with a diameter of 0,7; 1,1 and 1,5 mm
needle and silver thread
plastic bottle and glass asterisk
TOOLS
knitting needles with diameter 3 and 4 mm, scissors
For dress 220 string beads on pink wire and beads onto the 1964 silver. Dial on the spokes of 3 mm 44 loop of pink wire. Knit one row without beads, then four, adding the bead to the loop in each odd row. Also complete the following 10 rows of silver wire. Go on knitting needles 4 mm, and follow the instructions to evening handbags on p. 80-81, starting from the place where the first knitting needles 4 mm. Spread the resulting triangle. Cut the same triangles out of the lining fabric and foil.
Head fairy glue universal glue two disks. The groove between the edges of the disc subsequently will keep the doll body. Draw a face with a thin marker.
Wrap the knitting needle pink wire for long spiral. Cut it into pieces with a length of 2.5 cm At the end of the spiral, put beads under an angle of 45 degrees, turning down the tip of the wire to secure. The opposite ends of the twisted string on wire with a diameter of 1.1 mm (see photo).
Collect the spirals together, placing them in the middle of the wire. The Central piece of wrap around glass of head. Loop the ends where it will be neck and secure the loop with spirals. Fold the ends of the wire in the form of the letter V, leaving the ends for the dress and legs. On each end of the slide bead-Shoe and bend it at an angle of 45 degrees. Tightly ocrotite the remaining wire around each leg.
Cut a piece of wire with a diameter of 1.5 mm and make it a double flat spiral (see "Basic techniques"). It will make the fairy's hands. Secure the spiral in the upper body by tying it with wire diameter 0.7 mm from wrist to wrist, along with the frame of the body (see photo).
Cover the frame of the trunk with a triangle of foil, and then paste it between the knitted dress and lining fabric. Stitch the edges together with a silver thread.
Tie a piece of wire with a diameter of 0.7 mm glass around the sprocket and thread the beads onto the loose end of the wire wand. Draw a template of the wings out of paper and cut them out along the contour. Make wings from a plastic bottle on the paper template. In the center of the wings pierce four holes. Will napisite the wings a different color paint from an aerosol can.
Sew the wings to the dress through the holes with wire or string. Attach the wand to the fairy's hand, tying the end of the wand around your arm. Hang bead-heart to the other arm on a silver thread. Carefully stretch the spirals-hair.
