Valentine's day — the holiday of lovers. The symbol of this day — the heart. A box of chocolates, birthday cake, small gifts, according to tradition, in the shape of a heart. We offer you to do decoration for a romantic dinner for two — a heart inlaid with glass beads. Hang it on a window or decorate a vase with flowers or candles. To make it more spectacular look, try to combine copper wire with red or blue glass beads.
MATERIALS
galvanized wire with a diameter of 0.9 and 1 mm
small transparent glass beads
universal adhesive
TOOLS
a wooden rod with a diameter of 1 cm
clippers
pliers
Navathe tightly on the rod spiral of the necessary length of wire with a diameter of 0.9 mm (see "Fabrication of the looping spiral"). After the winding of the spiral, carefully remove it from the rod.
Slightly pry apart the coils of a tight spiral (see "the Manufacture of the looping spiral").
Pick up the spiral on a piece of wire with a diameter of 1 mm, so that it was located around a rigid frame. Try to hold the frame as accurately as possible through the center of the spiral, so that the product looked neat. The frame should stick out from both ends of the helix is approximately 1 cm.
Fold the spiral in the middle with the letter V. This will be the bottom end of the frame.
Bend both halves of spiral-arcs for the formation of the upper part of the heart. Push the ends of the frame through the several loops of the spiral on opposite sides of the heart, and then with the pliers bend the ends to a geared one for the other loops. When the outline of the heart is connected splashlite several loops of a spiral in closed turns for more reliable fastening.
Insert the balls between the turns of the helix at equal intervals along the contour of a heart. They are firmly secured, if inserted with enough force, the desire to stick each ball with the back side at the point of contact with the wire.
