Pendant "Wild rose"

Product weight: 41,9 grams

Materials

  • silver memory wire with large diameter is 1 and 1/6 of a revolution;
  • jewelry cord — 1.2 meters;
  • crimp (clamps) silver — 20 pieces;
  • roundels with red crystals with a diameter of 0.7 cm — 1 piece;
  • transparent seed beads — 172 pieces;
  • faceted red beads — 172 pieces;
  • round beads of hematite with a diameter of 0.4 cm — 28 pieces;
  • flat hematite beads with a diameter of 0.7 cm — 10 pieces;
  • cylindrical orange — red beads of glass size 1.8 x 1.2 cm — 6 pieces (hole of the beads should be wide enough to facilitate two-folded each other of the segments of wire).

Job description

  • For pendant making use of wire with memory of large diameter. Placed in the center of the circle one rondolino.
  • Further, on both sides symmetrically strung on: one flat busine hematite, 20 red beads, one round busine hematite, 10 clear beads, one round busine hematite, one orange — red Bucine, and 5 red beads.
  • Make the wire into a ring strung from two opposite sides of the same orange — red beads. Tighten the wire ends so that two sides were equal segments.
  • The ends of the wire rises up and strung on: 15 transparent beads, one round busine hematite and 5 red beads.
  • The ends of the wire simultaneously threaded through one orange — red bead. Helping yourself with tools, evenly pull the ends of the wire to the side.
  • On the upper free ends of the two sides strung on: 5 transparent beads, one round busine hematite and 5 red beads. Wire with beads bends down. The end block loops inside. Formed wire skeleton of the pendant.
  • To be completed pendant using jewelry cord. It is lightweight, flexible and durable material.
  • Through the Central orange — red glass bead stretch jewelry cord. Distribute it strictly in the center. To consolidate the whole structure of the pendant required crimp (clamps). They are firmly fixed beads on the jewelry cord and allow you to create ornate patterns. It is important to carefully clamp tonkokostny krimp, so as not to damage it.
  • The jewelry on the cord symmetrically strung on 7 transparent beads with alternating red beads. From opposite ends of the threaded one orange — red bead and tighten the wire in the ring. The edges symmetrically strung in the 6 transparent beads with alternating red beads. Put the crimp block.
  • Then add on the ends of the rope in one round busine hematite, one flat busine hematite and hematite round busine. From opposite ends of the threaded one orange — red bead and re-tighten the rope into the ring. Next, placed on 5 red beads and put a block of crimp.
  • Continue to string on the two sides: one round busine hematite, one flat busine hematite, one round hematite busine, 7 transparent beads with alternating red beads. With tonagura put the blocks of the crimp.
  • The free ends of the cord threaded through the side of the orange — red beads. One on each side. Add interleaved 4 red and 4 clear beads. Put a block of krimp.
  • For krimp recruited through one round busine hematite, one flat busine hematite, one round busine hematite, 10 transparent beads with alternating red beads. Put a block of krimp.
  • Beads on the cable must lie close to each other, but freely. The thread should be flexible, elastic and free to bend at a slight angle.
  • Extend the ends of the jewelry cord through the top side inner loop and immediately put additional blocks crimp. If necessary, wire with beads bends down stronger.
  • Continue symmetrically strung on: one flat busine hematite, one round busine hematite, 6 transparent beads with alternating red beads, one round busine hematite, 6 transparent beads, with alternating red beads. Lock the crimp beads.
  • Rope with beads and beads the back is threaded between the wire frame of the pendant and lock with the previous front loop stringing.
  • Added symmetrically on each side: one round busine hematite, one clear bead, one red bead, one clear bead, and put a block of krimp. Threading the cable through the side of the orange — red beads (one on each side) and fasten it with a crimp.
  • Newly strung symmetrically to the cable 7 via the transparent beads with intervals of red beads.
  • With two opposite sides extending ends of the rope through the orange — red glass bead, located in the center of the circle pendant. Gently pull the ends and replusive clips. In conclusion, we apply on each side: one clip, one round busine hematite, one transparent bead and lead rope back, bypassing hematite bead and clamp. Razdelyaet tonkokostny clip. The excess jewelry cord cut, leaving 1.5 cm from each edge. The tips are hiding in the orange — red busine. Visible or invisible roughness on the tips of the wire if necessary, treated with a nail file.

Add comment

Security code
Refresh